Fix It Like a Pro
A typical plumbing issue is a water hammer. It makes a loud “bang” sound that can be quite alarming and obtrusive. Even while you might want to brush it off as one of those common, harmless noises, it might eventually ruin your plumbing system. You may save yourself costly repairs down the line by learning the fundamentals of a water hammer and how to correct it. Nonetheless, you may always rely on the assistance of your nearby plumbing repair contractor if you are unsure or lack the courage to do it yourself. The methods for fixing a water hammer with a water hammer arrester are listed below.
Disconnect the Water
Turn off the water to the dishwasher, washer, and any other fixtures that have water hammers. The gadget will typically feature a shutdown valve that may be twisted counterclockwise to turn off the water. An intermediate shutdown valve may occasionally be found further up the line. You might wish to turn off the water supply to the entire house before installing numerous water hammer arresters.
Cut the Hoses Off
After you disconnect the water hoses, pour any spilled water into a basin. Have some used towels close by as well. To turn the hose fittings loose, use adjustable or tongue-and-groove pliers.
Install the Water Hammer Arrester
When threading the arrester on, wrap Teflon tape or thread seal tape around the male end of each shutdown valve or water inlet for a more secure fit. Three or four times in a tight clockwise loop, wrap the tape. The water hammer arrester’s male threads should also be taped.
Connect the Supply Tube or Hoses
To attach the water supply tube or hose to the water hammer arrester, use pliers or a wrench. Enforce the link.
Activate the Water
Turn the shutdown valve counterclockwise to gradually start the water supply. The water may splutter in the faucets before flowing freely again if you turn off the water to the entire house. Visually check the connections for leaks using a flashlight. Conduct a single test cycle with every appliance on a water hammer arrester.
When it comes to plumbing repair, a plumbing contractor is the right professional you can trust. JP & DC LLC can help you take care of all your problems. So if you need my quality service in Silver Spring, MD, don’t hesitate to call me at (240) 232-8308 right away!